A new water tap will give a steadier water stream as well as recreate the outlook of your bathroom. There are some tangible steps for installing a bathroom tap, and in this write-up, we will try to let you know those steps to make the tap changing process more comfortable for you.
You need to follow some specific steps to change the tap of your bathroom and for making the changing process easy, quick and hassle-free. Here you will get to know about the steps that you have to go through for changing your bathroom tap into a new one and make the appearance of your bathroom more excellent.
Beautiful basins and taps are significant as these enhance the brightness and tidiness of your bathroom. After using a fixture for a long time, the water flow may not be in its most fresh condition.
And bacteria may also spread the tap may become discolored and fade, the finish may not remain the same as the new one as well as there may be several scratches too. So changing basin tap after a particular time or condition is essential to keep up the freshness as well as hygiene of your fixture and also of the water flow.
However, some people get worried about changing the tap and think the process is very hectic and complicated. Again, calling a plumber for changing the fixture is a bit expensive as well. So we have come up with an elaborated and easy-to-understand instructor for changing the tap of your basin. You need to go through the instructions, sometimes and have confidence in yourself.
For changing the old tap and installing the new one, you have to follow the below steps:
- First step: Turning off the water connection
- Second step: Removing the old tap
- Third step: Installing the new tap
- Fourth step: Connecting the plumbing
- Fifth step: Turning back the water supply on
The Details of These Five Steps Are As Follows
First Step: Turning Off The Water Connection
At the very first step, you have to turn the water connection of the bathroom taps off for both cold and hot water supplies.
After that, you have to open the faucets for draining out all the water that will be excess in line after turning off the water connection. You have to make sure that all the taps remain open.
Second Step: Removing The Old Tap
In this step, you have to unscrew all the nuts that hold the tap into the basin. You can easily unscrew the nuts once these are looser. After removing the screws, take aside the old fixture from the bay as well as the basin pipe.
Third step: Installing The New Tap
Now you need to connect the threaded post of the screw to the tap and set it into the hole of the basin. Then your tap will sit on your bay with the thread which is poking out. You will need a washer to ensure that the fixture is set on the basin nicely and there is no flaw in it.
Now you have to screw the nuts into the threaded post tightly and make sure those don’t loosen up later on. At this stage, the new tap is installed in your basin.
Fourth Step: Connecting The Plumbing
At the fourth step, you have to screw the connectors to the tap, and then you have to connect those to the pipes of your house water connection. The connection has a compression that fits in between which regulates pressure in the pipes and makes the flow safer.
Now you need to feed the cold and hot water pipes directly to the new lines from the wall. Now you must check the connection and make sure that there is no loss and leakage in the real connection; otherwise, problems may occur later on.
Fifth step: Turning Back The Water Supply On
Now you can turn on the water supply of your home from the main water lines. The water flow will force through if there is any air back up in the taps. If you close down the new taps while the air rushes into the lines, it may cause damage to your new tap.
So the experts recommend turning the tap on at the time of switching on the waterline back. However, make sure all the other fixtures and showers of your house is close after turning on the waterline back.
At this moment, your tap is ready, and you can enjoy a steady water stream from your new tap, which will also complement the appearance of your bathroom. You can switch from hot to cold water stream as per the mechanism of your new tap and main water line.
Changing the older bathroom tap and installing the new one doesn’t require much of it. You need to follow the above instructions step by step without excluding any.
However, you need to take care of your tap to make it durable and also check it out regularly if there is any leakage or damage.
Last Updated on January 1, 2022